Pharmacokinetic-pharmacodynamic analysis of drug liking blockade by buprenorphine subcutaneous depot (CAM2038) in participants with opioid use disorder.

Buprenorphine is used to treat opioid use disorder (OUD). Weekly and monthly subcutaneous long-acting buprenorphine injections (CAM2038) provide more stable buprenorphine plasma levels and reduce the treatment burden, misuse, and diversion associated with sublingual transmucosal buprenorphine formulations. To characterize the pharmacokinetic/pharmacodynamic (PK/PD) relationship, a maximum inhibition (Imax) model was developed relating CAM2038 buprenorphine plasma concentration to drug liking maximum effect (Emax) visual analog scale (VAS; bipolar) score after intramuscular hydromorphone administration. Data included time-matched observations of buprenorphine plasma concentration and drug liking Emax VAS score after hydromorphone 18 mg administration in 47 non-treatment-seeking adults with moderate to severe OUD in a phase 2 study. Analysis used non-|linear mixed-effects modeling (NONMEM®). The final Imax model adequately described the PK/PD relationship between buprenorphine plasma concentration and drug liking Emax VAS score. Simulations showed drug liking was effectively blocked at low buprenorphine plasma concentrations (0.4 ng/mL) where the upper 95% confidence interval of the drug liking Emax VAS score was below the pre-defined 11-point complete blockade threshold. The buprenorphine plasma concentration required to achieve 90% of the maximal effect (IC90) of drug liking was 0.675 ng/mL. Interindividual variability in responses to buprenorphine was observed; some participants experienced fluctuating responses, and a few did not achieve drug liking blockade even with higher buprenorphine plasma concentrations. This affirms the need to individualize treatment and titrate doses for optimal treatment outcomes. PK/PD models were also developed for desire to use VAS and Clinical Opiate Withdrawal Scale (COWS) scores, with results aligned to those for drug liking.

In vitro release and bioaccessibility of oral solid preparations in a dynamic gastrointestinal system simulating fasted and fed states: A case study of metformin hydrochloride tablets.

Food and formulation characteristics are crucial factors affecting the gastrointestinal release and absorption kinetics of oral solid preparations. In the present study, the dynamic continuous release and bioaccessibility of metformin hydrochloride immediate-release (IR) and sustained-release (SR) tablets were investigated in the dynamic human stomach-intestine (DHSI-IV) system simulating fasted and fed states in healthy adults. Both tablet formulations (particularly IR tablet) exhibited a postponed release in the fed state compared to the fasted state. Correspondingly, the bioaccessible fraction of metformin from IR tablets in the presence of high-fat meal was significantly reduced to 76.2 % of the fasted state. However, the in vitro bioaccessibility was less impaired by food for SR tablets with a fed/fasted ratio of 95.5 %. A convolution-based approach was used to convert in vitro bioaccessibility results to plasma concentration data. The predicted plasma concentration curve showed good agreement with human data in terms of pharmacokinetic (PK) parameters. In the fasted state, the predicted Cmax, Tmax and AUC0-24h of IR tablets were 943.9 ± 25.7 ng/mL, 2.0 ± 0.4 h and 7090.7 ± 112.0 ng.h/mL, respectively, mirroring values observed in healthy subjects. Overall, the DHSI-IV system has demonstrated potential to assess and predict the impact of meal intake on the in vivo release and absorption behaviors of oral solid preparations.

A convolution-based in vitro-in vivo correlation model for methylphenidate hydrochloride delayed-release and extended-release capsule.

Delayed-release and extended-release methylphenidate hydrochloride (JORNAY PM®) is a novel capsule formulation of methylphenidate hydrochloride, used to treat attention deficit hyperactivity disorder in patients 6 years and older. In this paper, we develop a Level A in vitro-in vivo correlation (IVIVC) model for extended-release methylphenidate hydrochloride to support post-approval manufacturing changes by evaluating a point-to-point correlation between the fraction of drug dissolved in vitro and the fraction of drug absorbed in vivo. Dissolution data from an in vitro study of three different release formulations: fast, medium, and slow, and pharmacokinetic data from two in vivo studies were used to develop an IVIVC model using a convolution-based approach. The time-course of the drug concentration resulting from an arbitrary dose was considered as a function of the in vivo drug absorption and the disposition and elimination processes defined by the unit impulse response function using the convolution integral. An IVIVC was incorporated in the model due to the temporal difference seen in the scatterplots of the estimated fraction of drug absorbed in vivo and the fraction of drug dissolved in vitro and Levy plots. Finally, the IVIVC model was subjected to evaluation of internal predictability. This IVIVC model can be used to predict in vivo profiles for different in vitro profiles of extended-release methylphenidate hydrochloride.

Pharmacokinetics and Food Effect Between a 100-mg Sustained-Release Tablet and a 50-mg Immediate-Release Tablet of Vildagliptin in Healthy Subjects.

Vildagliptin is one of the dipeptidyl peptidase-4 inhibitors. This study aimed to compare vildagliptin exposure between 50-mg immediate-release (IR) and 100-mg new sustained-release (SR) tablets, and evaluate the food effect on the pharmacokinetics (PKs) of vildagliptin. A randomized, open-label, 3-period, 3-treatment, 6-sequence crossover study was conducted on healthy subjects. During each period, subjects received the SR tablet either in the fasted (T1) or high-fat fed (T2) state once a day, or IR tablets administered twice a day in the fasted state (R). Blood samples for PK analysis were obtained serially up to 24 hours after dosing. Thirty-four subjects completed the study. The geometric mean ratios for the Cmax and AUC0-24h of T1 to R were 1.15 and 0.89, respectively. The corresponding values of T2 to T1 were 0.94 and 1.07, respectively. Vildagliptin exposure over 24 hours was similar between the SR and IR tablets. In addition, the PK profiles of the SR tablets were not altered by food. The SR tablets can be administered without a food effect and be an alternative option to IR tablets.

Pharmacokinetics of Long-Acting Methylphenidate: Formulation Differences, Bioequivalence, Interchangeability.

BACKGROUND AND OBJECTIVE: Attention deficit hyperactivity disorder is one of the most common neuropsychiatric conditions in children, and methylphenidate (MPH) is one of the first-line therapies. MPH is available in a variety of extended-release (ER) formulations worldwide, and most formulations are not considered bioequivalent due to differences in pharmacokinetics. It is hypothesized that the current bioequivalence guidelines from the different regulatory bodies may generate inconsistent findings or recommendations when assessing the bioequivalence of ER MPH formulations. This manuscript aims to conduct a comprehensive and narrative critical literature review to analyze pharmacokinetic data pertaining to ER formulations of MPH in order to assess bioequivalence, differences in regulatory guidelines, and additional pharmacokinetic-pharmacodynamic parameters that may help define interchangeability. METHODS: A literature search was conducted in EMBASE, Medline, and Cochrane Library with no time limits. Study characteristics, non-compartmental pharmacokinetic parameters, and bioequivalence data were extracted for analysis. RESULTS: Thirty-three studies were identified with primary pharmacokinetic data after the administration of ER MPH, of which 10 were direct comparative studies (i.e., at least 2 formulations tested within a single setting) and 23 were indirect comparisons (i.e., different experimental settings). Two formulations were consistently reported as bioequivalent across the regulatory bodies using criteria from their guidance documents, although inconsistencies have been observed. However, when additional kinetic criteria (discussed in this manuscript) were imposed, only one study met the more stringent definition of bioequivalence. Various clinical factors also had inconsistent effects on the pharmacokinetics and interchangeability of the different formulations, which were associated with a lack of standardization for assessing covariates across the regulatory agencies. CONCLUSION: Additional pharmacokinetic parameters and consistency in guidelines across the regulatory bodies may improve bioequivalence assessments. Based on our findings, more research is also required to understand whether bioequivalence is an appropriate measure for determining MPH interchangeability. This critical review is suitable for formulation scientists, clinical pharmacologists, and clinicians.

Development and Validation a UPLC-MS/MS Method for Quantification of Pentoxifylline in Beagle Plasma: Application for Pharmacokinetic Study of Food Effect.

Purpose: To develop an UPLC-MS/MS method for the quantitative analysis of pentoxifylline in beagle dog plasma and apply it to a pharmacokinetic study of food effect. Methods: Sample separation was achieved using a Kinetex Phenyl-Hexyl column (50 × 2.1 mm, 1.7 µm) with a gradient elution program in 5.5 min after a simple protein precipitation with methanol. Using the mobile phase that made up by 0.2% formic acid and 5mM ammonium formate water (A) and methanol (B). Quantitation was carried out using the positive ionization mode with multiple reaction monitoring (MRM). A randomized, single-dose, two-period crossover study was conducted in six fasted or fed beagles that received 400 mg pentoxifylline sustained-release tablets (Brand name: Shuanling™, CSPC Pharmaceutical Group). WinNonlin® software was used to calculate pharmacokinetic parameters. Results: The linear calibration range was 2-1000 ng/mL (r2> 0.99). Both intra- and inter-batch precision were less than 6.27%, and the accuracy ranged from 88.65% to 97.18%. Pentoxifylline was readily absorbed in fasted and fed dogs administered a dose of 400 mg (tmax:1.54h vs 1.83h). Compared to the fasted group, the AUC0→t and Cmax in the fed group increased by 1.71-fold and 1.30-fold, respectively. In the fasted group, the AUC0→t and Cmax values were 4684.08 h•ng/mL and 2402.33 ng/mL, respectively. In the fed group, these values were 8027.75 h•ng/mL and 3119.67 ng/mL. The difference in AUC0-t between the fed and fasted group was statistically significant. Conclusion: The novel optimized UPLC-MS/MS assay is an effective tool for the determination of pentoxifylline and has been successfully applied in pharmacokinetic studies of pentoxifylline in beagle dogs. The administration of pentoxifylline sustained-release tablets with food significantly increased the area under the time curve, and it is recommended that they should be administered during or shortly after feeding.

Comparative Pharmacokinetics and Bioequivalence Evaluation of Two Formulations of Pramipexole Dihydrochloride Extended-Release Tablets in Healthy Chinese Subjects Under Fasted and Fed States: A Randomized, Open-Label, Single-Dose, Two-Period Crossover Clinical Trial.

Background: Pramipexole dihydrochloride extended-release tablet is a novel long-acting form of non-ergot dopamine agonist indicated as one of main therapeutic approaches for Parkinson's disease. However, pharmacokinetic properties of extended-release pramipexole in healthy Chinese subjects remain unclear. Methods: A single-center, randomized, open-label, two-period crossover, single-dose study was performed to investigate comparative pharmacokinetics and evaluate bioequivalence of 0.375 mg test (Yangtze River Pharmaceutical Group Co., Ltd.) and reference (Trade name: Sifrol®, Boehringer Ingelheim Pharma GmbH & Co. KG) formulations of pramipexole dihydrochloride extended-release tablets in healthy Chinese subjects under fasted and fed states. Results: A total of 56 subjects (28 in each dietary trial) were enrolled and randomized. After single dose of 0.375 mg test and reference formulations under fasted condition, main pharmacokinetics of pramipexole were as follows: peak concentration (Cmax) were 409.33±95.93 and 413.77±132.03 pg/mL; plasma area under concentration-time curve from time 0 to last measurable concentration (AUC0-t) were 8801.95±1966.83 and 8646.37±2600.49 h*pg/mL; AUC from time 0 to infinity (AUC0-∞) were 9469.03±1991.61 and 9082.95±2666.26 h*pg/mL; elimination half-life (t1/2) were 11.98±3.91 and 9.85±2.63 h; both time to reach Cmax (Tmax) were about 4.50 h, respectively, for test and reference formulations. The 90% confidence intervals of geometric mean ratios (test/reference) of Cmax, AUC0-t and AUC0-∞ under fasted and fed conditions were all within 80-125%. Following administration under fed condition, Cmax and Tmax for both test and reference formulations slightly increased and prolonged to 5.0 h, respectively, but AUC approximately remained unchanged compared with dosing under fasted condition. Test and reference formulations showed similar bioequivalence and favorable safety under fasted and fed states. Conclusion: Test and reference formulations of pramipexole dihydrochloride extended-release tablets (0.375 mg) showed similar bioequivalence and well safety and tolerability in healthy Chinese subjects under fasted and fed states, which supports further investigations of test formulation in patients with Parkinson's disease.

Pharmacokinetic Study of Enteric-Coated Sustained-Release Aspirin Tablets in Healthy Chinese Participants.

Purpose: To study and compare the pharmacokinetic characteristics of enteric-coated sustained-release (EcSr) aspirin tablets with enteric-coated (Ec) aspirin tablets (Bayer S.p.A) in healthy Chinese participants. Patients and Methods: In this open, randomized, single-dose, three-way, crossover study, 18 healthy participants randomly received 100 mg EcSr tablets pre-prandially (a.c.), EcSr tablets post-prandially (p.c.), or Ec tablets a.c. in each period. The concentrations of acetylsalicylic acid (ASA) and salicylic acid (SA) in plasma were determined by the LC-MS/MS method, and the pharmacokinetic parameters were calculated using WinNonlin (version 8.1). Results: The essential PK parameters under the three treatment conditions (ie Ec a.c., EcSr a.c. and EcSr p.c.) were as follows: Cmax, ASA: 758.38±455.34, 222.77±98.04 and 194.54±61.19 ng, Tmax, ASA: 6.75(2,16), 4.5(2,11) and 8.25(5,11) h, T1/2, ASA: 0.43±0.08, 1.44±0.59 and 4.32±10.04 h, AUC0-t, ASA: 1008.88±452.27, 918.04±238.40 and 845.55±183.25 h·ng/mL; Cmax, SA: 6409.38±2098.52, 2863.53±679.73 and 2913.75±853.27ng/mL, Tmax, SA: 7.25(2,24), 10(3.5-14) and 10(7,14) h, T1/2, SA: 2.21±0.46, 2.69±0.72 and 3.51±2.06h, AUC0-t, SA: 29,131.41±9376.23, 27,243.97±7465.16, 27,240.25±7444.67 h·ng/mL. When taking EcSr aspirin tablets, the 90% confidence intervals of the geometric mean ratios (pre-prandial/post-prandial) of AUC0-t, ASA and AUC0-∞, ASA, Cmax, SA, AUC0-t, SA and AUC0-∞, SA were within the range of 80.00%-125.00%. Conclusion: EcSr aspirin tablets showed less inter-individual variation in release and absorption than Ec aspirin tablets, which was well reflected by comparing essential PK parameters. Furthermore, meals had no significant effect on the pharmacokinetics of EcSr aspirin tablets.

Design and evaluation of gastro-swelling/gastro-floating sustained-release tablets of brivaracetam for epilepsy therapy.

To prolong the absorption of the drug and achieve the effect of gastric retention, new brivaracetam tablets together with the characteristics of rapid swelling and sustained floating have been developed here. The tablets were optimized and prepared by direct compression techniques using Kollidon® SR and cross-linked polyvinylpyrrolidone (PVPP) XL as the matrix and disintegrant respectively, and carbomer 71G NF and polyethylene oxide (PEO) N60K as the gel materials to achieve sustained release effect. The characteristics of static expansion, floating time, drug release and dynamic swelling performance in vitro of the tablets were evaluated. The optimized formulations (F5 and F10) exhibited satisfactory swelling and floating properties, mechanical strength, and in vitro sustained-release characteristic with diffusion and matrix erosion mechanisms. X-ray images of beagle dogs showed that the tablet F5 could be retained in the stomach for more than 6 h. Furthermore, the pharmacokinetic studies in volunteers exhibited that the bioavailability of F5 and F10 was 95.70% (90% CI, 83.80%-109.28%) and 103.39% (90% CI, 87.61%-122.01%), respectively, relative to commercial tablets, with Tmax prolonged, demonstrating an excellent sustained-release effect. Therefore, the present system can reduce dosing frequency and improve patient compliance, which is expected to be a promising treatment option for epilepsy patients.

Pharmacokinetic Variables of Dapagliflozin/Metformin Extended-release Fixed-dose Combination in Healthy Chinese Volunteers and Regional Comparison.

PURPOSE: A fixed-dose combination (FDC) product combining dapagliflozin and metformin may increase medication adherence in patients with type 2 diabetes mellitus (T2DM) by minimizing pill burden associated with co-administration of individual component (IC) formulations and, consequently, improve cost-efficiency and compliance. This study evaluated the bioequivalence of the dapagliflozin/metformin FDC product versus IC administration in healthy volunteers from a Chinese population and assessed the safety profile of the FDC product. In addition, pharmacokinetic (PK) and safety comparisons of dapagliflozin and metformin across different regions were conducted to evaluate regional differences. METHODS: This single-center, open-label, parallel-cohort, randomized, 2-period, crossover study enrolled Chinese adults (aged 18-55 years). Volunteers in cohort 1 received either a single FDC tablet of dapagliflozin/metformin extended release (XR) (5/500 mg) or IC tablets (dapagliflozin [5 mg] and metformin XR [500 mg]). Volunteers in cohort 2 received a higher dosage in a similar manner (dapagliflozin [10 mg] and metformin XR [1000 mg]). Volunteers in each cohort were subsequently crossed over to receive the alternate cohort treatment. Plasma concentrations of dapagliflozin and metformin were determined, and bioequivalence analyses were performed under standard fed conditions. FINDINGS: Eighty healthy Chinese volunteers (89.9% male; mean age, 28.7 years) were randomized into cohort 1 (n = 40) and cohort 2 (n = 39; 1 volunteer withdrew before receiving study treatment). The mean plasma concentration-time profiles of the dapagliflozin and metformin FDC and IC formulations for both doses were found to be nearly superimposable. Dapagliflozin and metformin XR FDC were bioequivalent to the IC tablets, with 90% CIs for each pairwise comparison contained within the 80% to 125% bioequivalence limits. Both the FDC and IC formulations were well tolerated, with no serious adverse events/death. PK parameters for dapagliflozin in the Chinese volunteers were slightly to moderately higher than those from studies conducted in Brazil, Russia, and the United States, and the safety profile of the dapagliflozin/metformin FDC product was consistent with that of other studies. The difference in PK parameters among the 4 regions was not clinically meaningful. IMPLICATIONS: The bioequivalence of the dapagliflozin/metformin FDC and IC formulations in healthy Chinese adults was established without any new safety concerns. Notably, the observed bioequivalence may be extrapolated to patients with T2DM as the PK parameters of dapagliflozin and metformin in healthy adults are similar to those reported in patients with T2DM. CLINICALTRIALS: gov identifier: NCT04856007.

A pharmacokinetic study of extended-release buprenorphine in cynomolgus monkeys (Macaca fasicularis).

BACKGROUND: A novel buprenorphine (BUP) extended-release formulation (BUP-XR) produced as a lipid-encapsulated, low viscosity BUP suspension for subcutaneous (SC) injection to control pain was evaluated for pharmacokinetics and safety in four adult male cynomolgus monkeys. METHODS: Each animal was given 0.2 mg/kg reformulated BUP-XR SC. Clinical observations were made during the course of the study. Blood samples were obtained from each animal before BUP-XR administration, 6, 24, 48, 72, and 96 h post-BUP-XR injection. Plasma levels of buprenorphine were analyzed using HPLC-MS/MS. The PK values calculated included peak plasma concentration of the BUP analyte, time to peak plasma concentration, plasma half-life, area under the plasma concentration-time curve, clearance, apparent volume of distribution, and elimination rate constant (Cmax , Tmax , T½ , AUC0-t , CL, Vd, and Ke, respectively). RESULTS: Observable adverse clinical signs were not detected. BUP concentration peaked from 6 to 48 h, then declined in a linear fashion. Quantifiable plasma BUP was measured in all monkeys at all time points. Results indicate that a single BUP-XR dose at 0.2 mg/kg can reliably provide plasma levels of BUP reported in the literature to be therapeutically relevant for up to 96 h. CONCLUSIONS: Because of the lack of any clinical observations or adverse effects at the injection site or absence of observable abnormal behaviors, it may be concluded that the use of BUP-XR is safe and efficacious in this species of non-human primate at the dose regimen described in this study for up to 96 h post-administration.

Pharmacokinetics and Bioequivalence of 2 Nifedipine Controlled-Release Tablets: A Randomized, Single-Dose, 2-Period Crossover Study in Healthy Chinese Volunteers Under Fasting and Fed Conditions.

The aim of this study was to evaluate the bioequivalence of generic nifedipine controlled-release tablet compared to branded product under fasting and fed conditions. A randomized, single-dose, 2-period, crossover study with a 7-day washout period was performed in 84 healthy Chinese volunteers (fasting cohort, n = 42; fed cohort, n = 42). In each study period, volunteers were assigned to receive a single oral dose of the generic or reference product (30 mg). Blood samples were collected before dosing and up to 72 hours after administration. The plasma concentration of nifedipine was determined by a validated liquid chromatography-tandem mass spectrometry method. Pharmacokinetic parameters were obtained using a noncompartmental model and log-transformed pharmacokinetic parameters (maximum plasma concentration, area under the plasma concentration-time curve (AUC) from time 0 to the last measurable concentration, AUC from time 0 to infinity) were used to evaluate bioequivalence. The results showed that the 90% confidence interval for the geometric mean ratio of pharmacokinetic parameters of the test and reference products ranged from 80.0% to 125.0% in both the fasting and fed cohorts, meeting the criteria for bioequivalence. No serious adverse events were reported throughout the study and no adverse events led to withdrawal from the study. Food effects were found in both the test and reference products, with mean maximum plasma concentration, AUC from time 0 to the last measurable concentration, and AUC from time 0 to infinity increased by 23.7%, 20.7%, and 20.5%, respectively, for the test product and 35.2%, 13.4%, and 14.7% for the reference product after a high-fat and high-calorie breakfast.

Construction and evaluation of a phospholipid-based phase transition in situ gel system for brexpiprazole.

The objective of this study was to develop phospholipid-based injectable phase transition in situ gels (PTIGs) for the sustained release of Brexpiprazole (Brex). Phospholipid (Lipoid S100, S100) and stearic acid (SA) were used as the gel matrix which was dissolved in biocompatible solvent medium-chain triglyceride (MCT), N-methyl pyrrolidone (NMP), and ethanol to obtain PTIGs solution. The Brex PTIG showed a solution condition of low viscosity in vitro and was gelatinized in situ in vivo after subcutaneous injection. Both in vitro release assay and in vivo pharmacokinetics study in SD rats displayed that Brex in PTIGs could achieve a sustained release, compared with brexpiprazole solution (Brex-Sol) or brexpiprazole suspension (Brex-Sus). The Brex-PTIGs had good degradability and biocompatibility in vivo with rare inflammation at the injection site. Among the three Brex-PTIG formulations, Brex-PTIG-3 with the SA in the formulation had the greatest gelation viscosity, the lowest initial release rate, and the most stable release profile with sustained release of up to 60 days. The above results indicated that, as a novel drug delivery system, the Brex-PTIGs offered a new option for the clinical treatment of patients with schizophrenia.

Engineering Lipid Spherulites for the Sustained Release of Highly Dosed Small Hydrophilic Compounds.

Currently, there is a lack of parenteral sustained release formulations for the delivery of highly dosed small hydrophilic drugs. Therefore, parenteral lipid spherulites are engineered capable of entrapping large amounts of such compounds and spontaneously releasing them in a sustained fashion. A library of spherulites is prepared with a simple green process, using phosphatidylcholine (PC) and/or phosphatidylethanolamine (PE), nonionic surfactants and water. The vesicle formulations exhibiting appropriate size distribution and morphology are selected and loaded with 4,6-di-O-(methoxy-diethyleneglycol)-myo-inositol-1,2,3,5-tetrakis(phosphate), ((OEG2 )2 -IP4), an inositol phosphate derivative currently under clinical evaluation for the treatment of aortic valve stenosis. The loading efficiency of spherulites is up to 12.5-fold higher than that of liposomes produced with the same materials. While the PC-containing vesicles showed high stability, the PE spherulites gradually lost their multilayer organization upon dilution, triggering the active pharmaceutical ingredient (API) release over time. In vitro experiments and pharmacokinetic studies in rats demonstrated the ability of PE spherulites to increase the systemic exposure of (OEG2 )2 -IP4 up to 3.1-fold after subcutaneous injection, and to completely release their payload within 3-4 d. In conclusion, PE spherulites represent a promising lipid platform for the extravascular parenteral administration of highly dosed small hydrophilic drugs.

Model-Informed drug development of gastroretentive release systems for sildenafil citrate.

Gastroretentive drug delivery systems (GRDDS) are modified-release dosage forms designed to prolong their residence time in the upper gastrointestinal tract, where some drugs are preferentially absorbed, and increase the drug bioavailability. This work aimed the development of a novel GRDDS containing 60 mg of sildenafil citrate, and the evaluation of the feasibility of the proposed formulation for use in the treatment of pulmonary arterial hypertension (PAH), for once a day administration, by using in silico pharmacokinetic (PK) modeling and simulations using GastroPlusTM. The Model-Informed Drug Development (MIDD) approach was used in formulation design and pharmacokinetic exposure prospecting. A 22 factorial design with a central point was used for optimization of the formulation, which was produced by direct compression and characterized by some tests, including buoyancy test, assay, impurities, and in vitro dissolution. A compartmental PK model was built using the GatroPlusTM software for virtual bioequivalence of the proposed formulations in comparison with the defined target release profile provided by an immediate release (IR) tablet formulation containing 20 mg of sildenafil administered three times a day (TID). The results of the factorial design showed a direct correlation between the dissolution rate and the amount of hydroxypropyl methyl cellulose (HPMC) in the formulations. By comparing the PK parameters predicted by the virtual bioequivalence, the formulations F1, F2, F3 and F5 failed on bioequivalence. The F4 showed bioequivalence to the reference and was considered the viable formulation to substitute the IR. Thus, GRDDS could be a promising alternative for controlling the release of drugs with a pH-dependent solubility and narrow absorption window, specifically in the gastric environment, and an interesting way to reduce dose frequency and increase the drug bioavailability. The MIDD approach increases the level of information about the pharmaceutical product and guide the drug development for more assertive ways.

Antituberculosis Macozinone Extended-Release Tablets To Enhance Bioavailability: a Pilot Pharmacokinetic Study in Beagle Dogs.

Macozinone (MCZ; PBTZ169) is a first-in-class antituberculosis clinical-stage benzothiazinone-based drug candidate. Although its efficacy and safety have been strongly proven in several preclinical and clinical studies, the physicochemical and pharmacokinetic properties specific to MCZ required further optimization. Accordingly, this study aimed to evaluate the pharmacokinetics of MCZ administered as extended-release (ER) tablets F2 and F6 compared to immediate-release (IR) dispersible tablets for oral suspension. Oral absorption of MCZ from ER tablets was significantly different from that of IR tablets after a single oral dose in Beagle dogs in both fasted and fed states. In addition, food directly affects the bioavailability of MCZ from ER tablets but does not affect it from IR tablets. The high values of relative bioavailability of the prolonged-release tablets F2 and F6 compared to the IR tablets may indicate an indirect confirmation of their gastroretentive properties. Taken together, pharmacokinetic parameters have demonstrated that these MCZ oral formulations not just enhance drug bioavailability but may also improve regimen adherence by reducing MCZ dose frequency and reducing the development of drug resistance. IMPORTANCE Macozinone (MCZ) is the newest first-in-class clinical-stage benzothiazinone-based drug candidate for the treatment of tuberculosis. Yet, the extremely low oral bioavailability of MCZ, a major problem in clinical trials, needed to be addressed, and we are pleased to present our attempts to solve this issue. We report that extended-release tablets of MCZ significantly increased key pharmacokinetic parameters in the preclinical setting. We suggest that these MCZ oral formulations not just enhance drug bioavailability but may also improve regimen adherence by reducing MCZ dose frequency and reducing the development of drug resistance.

Losartan Potassium and Verapamil Hydrochloride Compound Transdermal Drug Delivery System: Formulation and Characterization.

In this study, we developed a sustained-release transdermal delivery system containing losartan potassium (LP) and verapamil hydrochloride (VPH). LP and VPH have low bioavailability and long half-life. Therefore, the development of an optimum administration mode is necessary to overcome these drawbacks and enhance the antihypertensive effect. A transdermal diffusion meter was used to determine the optimal formulation of LP-VPH transdermal drug delivery systems (TDDS). Based on in vitro results, a sustained-release patch was prepared. Physical characteristics, including quality, stickiness, and appearance, were evaluated in vitro, while pharmacokinetics and skin irritation were evaluated in vivo. The results showed that 8.3% polyvinyl alcohol, 74.7% polyvinylpyrrolidone K30, 12% oleic acid-azone, and 5% polyacrylic acid resin II provided an optimized TDDS product for effective administration of LP and VPH. Furthermore, in vitro and in vivo release tests showed that the system continuously released LP and VPH for 24 h. The pharmacokinetic results indicated that although the maximum concentration was lower, both the area under the curve from 0-time and the mean residence time of the prepared patch were significantly higher than those of the oral preparations. Furthermore, the prepared LP-VPH transdermal patch showed good stability and no skin irritation. The developed LP-VPH TDDS showed a sustained-release effect and good characteristics and pharmacokinetics; therefore, it is an ideal formulation.

IVIVC of Octreotide in PLGA-Glucose Microsphere Formulation, Sandostatin® LAR.

In vitro-in vivo correlation (IVIVC) analysis reveals a relationship between in vitro release and in vivo pharmacokinetic response of the drug of interest. Sandostatin LAR Depot (SLD) for endocrine tumors and acromegaly is a sustained-release formulation of octreotide, a cyclic oligomer of 8 amino acids, which prolongs therapeutic efficacy and enhances medication compliance of octreotide. Since the efficacy of SLD is dependent on the pharmacokinetic characteristics of octreotide released from a biodegradable matrix polymer, poly(lactide-co-glycolide)-glucose, of SLD, the IVIVC of SLD is critical for predicting an in vivo behavior of the octreotide. In this study, in vitro release of octreotide from SLD was investigated using the release test media each containing 0.02% or 0.5% surfactant and having different pH values of 7.4 and 5.5. In vivo pharmacokinetic profiles of SLD were determined by LC-MS/MS analysis of the systemic blood concentration of octreotide after the SLD injection to rodents. In IVIVC analysis, the Weibull model was adopted as a drug release model for biodegradable microsphere formulation. The IVIVC analyses revealed the in vitro release test condition of SLD with the highest IVIV correlation coefficient. By applying the in vitro release data to the model derived from the IVIVC analysis, pharmacokinetic parameters of SLD could be predicted with the prediction error of ± 10 ~ 15%. IVIVC analysis and pharmacokinetic prediction model of SLD in our study can be an efficient tool for the development of long-acting pharmaceutical dosage forms.

Patient-specific in vitro drug release testing coupled with in silico PBPK modeling to forecast the in vivo performance of oral extended-release levodopa formulations in Parkinson's disease patients.

Biorelevant in vitro release models are valuable analytical tools for oral drug development but often tailored to gastrointestinal conditions in 'average' healthy adults. However, predicting in vivo performance in individual patients whose gastrointestinal conditions do not match those of healthy adults would be of great value for optimizing oral drug therapy for such patients. This study focused on establishing patient-specific in vitro and in silico models to predict the in vivo performance of levodopa extended-release products in Parkinson's disease patients. Current knowledge on gastrointestinal conditions in these patients was incorporated into model development. Relevant in vivo pharmacokinetic data and patient-specific in vitro release data from a novel in vitro test setup were integrated into patient-specific physiologically-based pharmacokinetic models. AUC, cmax and tmax of the computed plasma profiles were calculated using PK-Sim®. For the products studied, levodopa plasma concentration-time profiles modeled using this novel approach compared far better with published average plasma profiles in Parkinson's disease patients than those derived from in vitro release data obtained from the 'average' healthy adult setup. Although further work is needed, results of this study highlight the importance of addressing patient-specific gastrointestinal conditions when aiming to predict drug release in such specific patient groups.

Population pharmacokinetic analysis of acetaminophen overdose with immediate release, extended release and modified release formulations.

OBJECTIVES: The introduction of delayed release formulations of acetaminophen (APAP) has created concern about the role of formulation in overdose. We examined the APAP overdose pharmacokinetic (PK) profiles to assess the role of dose, coingestants and formulation: immediate release (IR), extended release (ER), and modified release (MR) on APAP pharmacokinetic measures. METHODS: We collected by-subject APAP PK data: subject description, timed blood APAP concentrations, dose, and coingestants. We sought both overdose and randomized controlled trials (RCTs) for supratherapeutic doses involving ER or MR formulations. Data analysis and simulation used the non-linear mixed-effects modeling program NONMEM-version 7.4. RESULTS: The final dataset comprised 3,033 [APAP] from 356 subjects and 15 sources including 3 RCTs (179 subjects receiving IR, 122 ER, 65 MR). The final population PK (PopPK) model was a linear 2-compartment model with first-order (oral) absorption. Covariate relationships included: APAP absorption rate and bioavailability decreased with increased oral dose (p < 0.00005) for all 3 formulations (MR > ER > IR). Post hoc analyses showed opioid coingestant increased exposure (area under the curve, AUC) by factor of 1.6. Simulations of 100 g vs 10 g doses for IR, ER and MR showed overdose of the ER formulation exhibits slower absorption and lower Cmax, overall exposure (AUC) is less than 80% of an equivalent dose of IR acetaminophen. The overall exposure for the MR formulation is less than 70% of an equivalent dose of IR. CONCLUSIONS: Acetaminophen ER and MR formulations have slower absorption and decreased bioavailability leading to a lower Cmax and later Tmax than the IR formulation. These results have potential clinical implications because delayed absorption could confound use of the Rumack-Matthew nomogram by underestimating the severity of ingestion early in the course of treatment.